infong/DAPLink
1
0
Fork 0
mirror of https://github.com/XIVN1987/DAPLink.git synced 2026-09-27 06:26:16 +00:00
Code Issues Packages Projects Releases Wiki Activity

update CMSIS-DAP to v2.1.0

Browse Source
This commit is contained in:
XIVN1987
2024-12-08 08:47:57 +08:00
parent aa14c15461
commit 4e6b0561a8
355 changed files with 3570 additions and 275969 deletions
Download Patch File Download Diff File Expand all files Collapse all files
core/DAP/Config/DAP_config.h
+561
View File
@@ -0,0 +1,561 @@
/*
* Copyright (c) 2013-2021 ARM Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* ----------------------------------------------------------------------
*
* $Date: 16. June 2021
* $Revision: V2.1.0
*
* Project: CMSIS-DAP Configuration
* Title: DAP_config.h CMSIS-DAP Configuration File (Template)
*
*---------------------------------------------------------------------------*/
#ifndef __DAP_CONFIG_H__
#define __DAP_CONFIG_H__
//**************************************************************************************************
/**
\defgroup DAP_Config_Debug_gr CMSIS-DAP Debug Unit Information
\ingroup DAP_ConfigIO_gr
@{
Provides definitions about the hardware and configuration of the Debug Unit.
This information includes:
- Definition of Cortex-M processor parameters used in CMSIS-DAP Debug Unit.
- Debug Unit Identification strings (Vendor, Product, Serial Number).
- Debug Unit communication packet size.
- Debug Access Port supported modes and settings (JTAG/SWD and SWO).
- Optional information about a connected Target Device (for Evaluation Boards).
*/
#ifdef _RTE_
#include "RTE_Components.h"
#include CMSIS_device_header
#else
#include "device.h" // Debug Unit Cortex-M Processor Header File
#endif
/// Processor Clock of the Cortex-M MCU used in the Debug Unit.
/// This value is used to calculate the SWD/JTAG clock speed.
#define CPU_CLOCK 100000000U ///< Specifies the CPU Clock in Hz.
/// Number of processor cycles for I/O Port write operations.
/// This value is used to calculate the SWD/JTAG clock speed that is generated with I/O
/// Port write operations in the Debug Unit by a Cortex-M MCU. Most Cortex-M processors
/// require 2 processor cycles for a I/O Port Write operation. If the Debug Unit uses
/// a Cortex-M0+ processor with high-speed peripheral I/O only 1 processor cycle might be
/// required.
#define IO_PORT_WRITE_CYCLES 2U ///< I/O Cycles: 2=default, 1=Cortex-M0+ fast I/0.
/// Indicate that Serial Wire Debug (SWD) communication mode is available at the Debug Access Port.
/// This information is returned by the command \ref DAP_Info as part of <b>Capabilities</b>.
#define DAP_SWD 1 ///< SWD Mode: 1 = available, 0 = not available.
/// Indicate that JTAG communication mode is available at the Debug Port.
/// This information is returned by the command \ref DAP_Info as part of <b>Capabilities</b>.
#define DAP_JTAG 1 ///< JTAG Mode: 1 = available, 0 = not available.
/// Configure maximum number of JTAG devices on the scan chain connected to the Debug Access Port.
/// This setting impacts the RAM requirements of the Debug Unit. Valid range is 1 .. 255.
#define DAP_JTAG_DEV_CNT 8U ///< Maximum number of JTAG devices on scan chain.
/// Default communication mode on the Debug Access Port.
/// Used for the command \ref DAP_Connect when Port Default mode is selected.
#define DAP_DEFAULT_PORT 1U ///< Default JTAG/SWJ Port Mode: 1 = SWD, 2 = JTAG.
/// Default communication speed on the Debug Access Port for SWD and JTAG mode.
/// Used to initialize the default SWD/JTAG clock frequency.
/// The command \ref DAP_SWJ_Clock can be used to overwrite this default setting.
#define DAP_DEFAULT_SWJ_CLOCK 1000000U ///< Default SWD/JTAG clock frequency in Hz.
/// Maximum Package Size for Command and Response data.
/// This configuration settings is used to optimize the communication performance with the
/// debugger and depends on the USB peripheral. Typical vales are 64 for Full-speed USB HID or WinUSB,
/// 1024 for High-speed USB HID and 512 for High-speed USB WinUSB.
#define DAP_PACKET_SIZE 512U ///< Specifies Packet Size in bytes.
/// Maximum Package Buffers for Command and Response data.
/// This configuration settings is used to optimize the communication performance with the
/// debugger and depends on the USB peripheral. For devices with limited RAM or USB buffer the
/// setting can be reduced (valid range is 1 .. 255).
#define DAP_PACKET_COUNT 8U ///< Specifies number of packets buffered.
/// Indicate that UART Serial Wire Output (SWO) trace is available.
/// This information is returned by the command \ref DAP_Info as part of <b>Capabilities</b>.
#define SWO_UART 1 ///< SWO UART: 1 = available, 0 = not available.
/// USART Driver instance number for the UART SWO.
#define SWO_UART_DRIVER 0 ///< USART Driver instance number (Driver_USART#).
/// Maximum SWO UART Baudrate.
#define SWO_UART_MAX_BAUDRATE 10000000U ///< SWO UART Maximum Baudrate in Hz.
/// Indicate that Manchester Serial Wire Output (SWO) trace is available.
/// This information is returned by the command \ref DAP_Info as part of <b>Capabilities</b>.
#define SWO_MANCHESTER 0 ///< SWO Manchester: 1 = available, 0 = not available.
/// SWO Trace Buffer Size.
#define SWO_BUFFER_SIZE 4096U ///< SWO Trace Buffer Size in bytes (must be 2^n).
/// SWO Streaming Trace.
#define SWO_STREAM 0 ///< SWO Streaming Trace: 1 = available, 0 = not available.
/// Clock frequency of the Test Domain Timer. Timer value is returned with \ref TIMESTAMP_GET.
#define TIMESTAMP_CLOCK 100000000U ///< Timestamp clock in Hz (0 = timestamps not supported).
/// Indicate that UART Communication Port is available.
/// This information is returned by the command \ref DAP_Info as part of <b>Capabilities</b>.
#define DAP_UART 1 ///< DAP UART: 1 = available, 0 = not available.
/// USART Driver instance number for the UART Communication Port.
#define DAP_UART_DRIVER 1 ///< USART Driver instance number (Driver_USART#).
/// UART Receive Buffer Size.
#define DAP_UART_RX_BUFFER_SIZE 1024U ///< Uart Receive Buffer Size in bytes (must be 2^n).
/// UART Transmit Buffer Size.
#define DAP_UART_TX_BUFFER_SIZE 1024U ///< Uart Transmit Buffer Size in bytes (must be 2^n).
/// Indicate that UART Communication via USB COM Port is available.
/// This information is returned by the command \ref DAP_Info as part of <b>Capabilities</b>.
#define DAP_UART_USB_COM_PORT 1 ///< USB COM Port: 1 = available, 0 = not available.
/// Debug Unit is connected to fixed Target Device.
/// The Debug Unit may be part of an evaluation board and always connected to a fixed
/// known device. In this case a Device Vendor, Device Name, Board Vendor and Board Name strings
/// are stored and may be used by the debugger or IDE to configure device parameters.
#define TARGET_FIXED 0 ///< Target: 1 = known, 0 = unknown;
#define TARGET_DEVICE_VENDOR "Arm" ///< String indicating the Silicon Vendor
#define TARGET_DEVICE_NAME "Cortex-M" ///< String indicating the Target Device
#define TARGET_BOARD_VENDOR "Arm" ///< String indicating the Board Vendor
#define TARGET_BOARD_NAME "Arm board" ///< String indicating the Board Name
#if TARGET_FIXED != 0
#include <string.h>
static const char TargetDeviceVendor [] = TARGET_DEVICE_VENDOR;
static const char TargetDeviceName [] = TARGET_DEVICE_NAME;
static const char TargetBoardVendor [] = TARGET_BOARD_VENDOR;
static const char TargetBoardName [] = TARGET_BOARD_NAME;
#endif
/** Get Vendor Name string.
\param str Pointer to buffer to store the string (max 60 characters).
\return String length (including terminating NULL character) or 0 (no string).
*/
__STATIC_INLINE uint8_t DAP_GetVendorString (char *str) {
(void)str;
return (0U);
}
/** Get Product Name string.
\param str Pointer to buffer to store the string (max 60 characters).
\return String length (including terminating NULL character) or 0 (no string).
*/
__STATIC_INLINE uint8_t DAP_GetProductString (char *str) {
(void)str;
return (0U);
}
/** Get Serial Number string.
\param str Pointer to buffer to store the string (max 60 characters).
\return String length (including terminating NULL character) or 0 (no string).
*/
__STATIC_INLINE uint8_t DAP_GetSerNumString (char *str) {
(void)str;
return (0U);
}
/** Get Target Device Vendor string.
\param str Pointer to buffer to store the string (max 60 characters).
\return String length (including terminating NULL character) or 0 (no string).
*/
__STATIC_INLINE uint8_t DAP_GetTargetDeviceVendorString (char *str) {
#if TARGET_FIXED != 0
uint8_t len;
strcpy(str, TargetDeviceVendor);
len = (uint8_t)(strlen(TargetDeviceVendor) + 1U);
return (len);
#else
(void)str;
return (0U);
#endif
}
/** Get Target Device Name string.
\param str Pointer to buffer to store the string (max 60 characters).
\return String length (including terminating NULL character) or 0 (no string).
*/
__STATIC_INLINE uint8_t DAP_GetTargetDeviceNameString (char *str) {
#if TARGET_FIXED != 0
uint8_t len;
strcpy(str, TargetDeviceName);
len = (uint8_t)(strlen(TargetDeviceName) + 1U);
return (len);
#else
(void)str;
return (0U);
#endif
}
/** Get Target Board Vendor string.
\param str Pointer to buffer to store the string (max 60 characters).
\return String length (including terminating NULL character) or 0 (no string).
*/
__STATIC_INLINE uint8_t DAP_GetTargetBoardVendorString (char *str) {
#if TARGET_FIXED != 0
uint8_t len;
strcpy(str, TargetBoardVendor);
len = (uint8_t)(strlen(TargetBoardVendor) + 1U);
return (len);
#else
(void)str;
return (0U);
#endif
}
/** Get Target Board Name string.
\param str Pointer to buffer to store the string (max 60 characters).
\return String length (including terminating NULL character) or 0 (no string).
*/
__STATIC_INLINE uint8_t DAP_GetTargetBoardNameString (char *str) {
#if TARGET_FIXED != 0
uint8_t len;
strcpy(str, TargetBoardName);
len = (uint8_t)(strlen(TargetBoardName) + 1U);
return (len);
#else
(void)str;
return (0U);
#endif
}
/** Get Product Firmware Version string.
\param str Pointer to buffer to store the string (max 60 characters).
\return String length (including terminating NULL character) or 0 (no string).
*/
__STATIC_INLINE uint8_t DAP_GetProductFirmwareVersionString (char *str) {
(void)str;
return (0U);
}
///@}
//**************************************************************************************************
/**
\defgroup DAP_Config_PortIO_gr CMSIS-DAP Hardware I/O Pin Access
\ingroup DAP_ConfigIO_gr
@{
Standard I/O Pins of the CMSIS-DAP Hardware Debug Port support standard JTAG mode
and Serial Wire Debug (SWD) mode. In SWD mode only 2 pins are required to implement the debug
interface of a device. The following I/O Pins are provided:
JTAG I/O Pin | SWD I/O Pin | CMSIS-DAP Hardware pin mode
---------------------------- | -------------------- | ---------------------------------------------
TCK: Test Clock | SWCLK: Clock | Output Push/Pull
TMS: Test Mode Select | SWDIO: Data I/O | Output Push/Pull; Input (for receiving data)
TDI: Test Data Input | | Output Push/Pull
TDO: Test Data Output | | Input
nTRST: Test Reset (optional) | | Output Open Drain with pull-up resistor
nRESET: Device Reset | nRESET: Device Reset | Output Open Drain with pull-up resistor
DAP Hardware I/O Pin Access Functions
-------------------------------------
The various I/O Pins are accessed by functions that implement the Read, Write, Set, or Clear to
these I/O Pins.
For the SWDIO I/O Pin there are additional functions that are called in SWD I/O mode only.
This functions are provided to achieve faster I/O that is possible with some advanced GPIO
peripherals that can independently write/read a single I/O pin without affecting any other pins
of the same I/O port. The following SWDIO I/O Pin functions are provided:
- \ref PIN_SWDIO_OUT_ENABLE to enable the output mode from the DAP hardware.
- \ref PIN_SWDIO_OUT_DISABLE to enable the input mode to the DAP hardware.
- \ref PIN_SWDIO_IN to read from the SWDIO I/O pin with utmost possible speed.
- \ref PIN_SWDIO_OUT to write to the SWDIO I/O pin with utmost possible speed.
*/
// Configure DAP I/O pins ------------------------------
/** Setup JTAG I/O pins: TCK, TMS, TDI, TDO, nTRST, and nRESET.
Configures the DAP Hardware I/O pins for JTAG mode:
- TCK, TMS, TDI, nTRST, nRESET to output mode and set to high level.
- TDO to input mode.
*/
__STATIC_INLINE void PORT_JTAG_SETUP (void) {
;
}
/** Setup SWD I/O pins: SWCLK, SWDIO, and nRESET.
Configures the DAP Hardware I/O pins for Serial Wire Debug (SWD) mode:
- SWCLK, SWDIO, nRESET to output mode and set to default high level.
- TDI, nTRST to HighZ mode (pins are unused in SWD mode).
*/
__STATIC_INLINE void PORT_SWD_SETUP (void) {
;
}
/** Disable JTAG/SWD I/O Pins.
Disables the DAP Hardware I/O pins which configures:
- TCK/SWCLK, TMS/SWDIO, TDI, TDO, nTRST, nRESET to High-Z mode.
*/
__STATIC_INLINE void PORT_OFF (void) {
;
}
// SWCLK/TCK I/O pin -------------------------------------
/** SWCLK/TCK I/O pin: Get Input.
\return Current status of the SWCLK/TCK DAP hardware I/O pin.
*/
__STATIC_FORCEINLINE uint32_t PIN_SWCLK_TCK_IN (void) {
return (0U);
}
/** SWCLK/TCK I/O pin: Set Output to High.
Set the SWCLK/TCK DAP hardware I/O pin to high level.
*/
__STATIC_FORCEINLINE void PIN_SWCLK_TCK_SET (void) {
;
}
/** SWCLK/TCK I/O pin: Set Output to Low.
Set the SWCLK/TCK DAP hardware I/O pin to low level.
*/
__STATIC_FORCEINLINE void PIN_SWCLK_TCK_CLR (void) {
;
}
// SWDIO/TMS Pin I/O --------------------------------------
/** SWDIO/TMS I/O pin: Get Input.
\return Current status of the SWDIO/TMS DAP hardware I/O pin.
*/
__STATIC_FORCEINLINE uint32_t PIN_SWDIO_TMS_IN (void) {
return (0U);
}
/** SWDIO/TMS I/O pin: Set Output to High.
Set the SWDIO/TMS DAP hardware I/O pin to high level.
*/
__STATIC_FORCEINLINE void PIN_SWDIO_TMS_SET (void) {
;
}
/** SWDIO/TMS I/O pin: Set Output to Low.
Set the SWDIO/TMS DAP hardware I/O pin to low level.
*/
__STATIC_FORCEINLINE void PIN_SWDIO_TMS_CLR (void) {
;
}
/** SWDIO I/O pin: Get Input (used in SWD mode only).
\return Current status of the SWDIO DAP hardware I/O pin.
*/
__STATIC_FORCEINLINE uint32_t PIN_SWDIO_IN (void) {
return (0U);
}
/** SWDIO I/O pin: Set Output (used in SWD mode only).
\param bit Output value for the SWDIO DAP hardware I/O pin.
*/
__STATIC_FORCEINLINE void PIN_SWDIO_OUT (uint32_t bit) {
;
}
/** SWDIO I/O pin: Switch to Output mode (used in SWD mode only).
Configure the SWDIO DAP hardware I/O pin to output mode. This function is
called prior \ref PIN_SWDIO_OUT function calls.
*/
__STATIC_FORCEINLINE void PIN_SWDIO_OUT_ENABLE (void) {
;
}
/** SWDIO I/O pin: Switch to Input mode (used in SWD mode only).
Configure the SWDIO DAP hardware I/O pin to input mode. This function is
called prior \ref PIN_SWDIO_IN function calls.
*/
__STATIC_FORCEINLINE void PIN_SWDIO_OUT_DISABLE (void) {
;
}
// TDI Pin I/O ---------------------------------------------
/** TDI I/O pin: Get Input.
\return Current status of the TDI DAP hardware I/O pin.
*/
__STATIC_FORCEINLINE uint32_t PIN_TDI_IN (void) {
return (0U);
}
/** TDI I/O pin: Set Output.
\param bit Output value for the TDI DAP hardware I/O pin.
*/
__STATIC_FORCEINLINE void PIN_TDI_OUT (uint32_t bit) {
;
}
// TDO Pin I/O ---------------------------------------------
/** TDO I/O pin: Get Input.
\return Current status of the TDO DAP hardware I/O pin.
*/
__STATIC_FORCEINLINE uint32_t PIN_TDO_IN (void) {
return (0U);
}
// nTRST Pin I/O -------------------------------------------
/** nTRST I/O pin: Get Input.
\return Current status of the nTRST DAP hardware I/O pin.
*/
__STATIC_FORCEINLINE uint32_t PIN_nTRST_IN (void) {
return (0U);
}
/** nTRST I/O pin: Set Output.
\param bit JTAG TRST Test Reset pin status:
- 0: issue a JTAG TRST Test Reset.
- 1: release JTAG TRST Test Reset.
*/
__STATIC_FORCEINLINE void PIN_nTRST_OUT (uint32_t bit) {
;
}
// nRESET Pin I/O------------------------------------------
/** nRESET I/O pin: Get Input.
\return Current status of the nRESET DAP hardware I/O pin.
*/
__STATIC_FORCEINLINE uint32_t PIN_nRESET_IN (void) {
return (0U);
}
/** nRESET I/O pin: Set Output.
\param bit target device hardware reset pin status:
- 0: issue a device hardware reset.
- 1: release device hardware reset.
*/
__STATIC_FORCEINLINE void PIN_nRESET_OUT (uint32_t bit) {
;
}
///@}
//**************************************************************************************************
/**
\defgroup DAP_Config_LEDs_gr CMSIS-DAP Hardware Status LEDs
\ingroup DAP_ConfigIO_gr
@{
CMSIS-DAP Hardware may provide LEDs that indicate the status of the CMSIS-DAP Debug Unit.
It is recommended to provide the following LEDs for status indication:
- Connect LED: is active when the DAP hardware is connected to a debugger.
- Running LED: is active when the debugger has put the target device into running state.
*/
/** Debug Unit: Set status of Connected LED.
\param bit status of the Connect LED.
- 1: Connect LED ON: debugger is connected to CMSIS-DAP Debug Unit.
- 0: Connect LED OFF: debugger is not connected to CMSIS-DAP Debug Unit.
*/
__STATIC_INLINE void LED_CONNECTED_OUT (uint32_t bit) {}
/** Debug Unit: Set status Target Running LED.
\param bit status of the Target Running LED.
- 1: Target Running LED ON: program execution in target started.
- 0: Target Running LED OFF: program execution in target stopped.
*/
__STATIC_INLINE void LED_RUNNING_OUT (uint32_t bit) {}
///@}
//**************************************************************************************************
/**
\defgroup DAP_Config_Timestamp_gr CMSIS-DAP Timestamp
\ingroup DAP_ConfigIO_gr
@{
Access function for Test Domain Timer.
The value of the Test Domain Timer in the Debug Unit is returned by the function \ref TIMESTAMP_GET. By
default, the DWT timer is used. The frequency of this timer is configured with \ref TIMESTAMP_CLOCK.
*/
/** Get timestamp of Test Domain Timer.
\return Current timestamp value.
*/
__STATIC_INLINE uint32_t TIMESTAMP_GET (void) {
return (DWT->CYCCNT);
}
///@}
//**************************************************************************************************
/**
\defgroup DAP_Config_Initialization_gr CMSIS-DAP Initialization
\ingroup DAP_ConfigIO_gr
@{
CMSIS-DAP Hardware I/O and LED Pins are initialized with the function \ref DAP_SETUP.
*/
/** Setup of the Debug Unit I/O pins and LEDs (called when Debug Unit is initialized).
This function performs the initialization of the CMSIS-DAP Hardware I/O Pins and the
Status LEDs. In detail the operation of Hardware I/O and LED pins are enabled and set:
- I/O clock system enabled.
- all I/O pins: input buffer enabled, output pins are set to HighZ mode.
- for nTRST, nRESET a weak pull-up (if available) is enabled.
- LED output pins are enabled and LEDs are turned off.
*/
__STATIC_INLINE void DAP_SETUP (void) {
;
}
/** Reset Target Device with custom specific I/O pin or command sequence.
This function allows the optional implementation of a device specific reset sequence.
It is called when the command \ref DAP_ResetTarget and is for example required
when a device needs a time-critical unlock sequence that enables the debug port.
\return 0 = no device specific reset sequence is implemented.\n
1 = a device specific reset sequence is implemented.
*/
__STATIC_INLINE uint8_t RESET_TARGET (void) {
return (0U); // change to '1' when a device reset sequence is implemented
}
///@}
#endif /* __DAP_CONFIG_H__ */
core/DAP/DAP.h → core/DAP/Include/DAP.h
+58 -25
View File
@@ -1,7 +1,5 @@
/*
* Copyright (c) 2013-2020 ARM Limited. All rights reserved.
* Copyright 2019, Cypress Semiconductor Corporation
* or a subsidiary of Cypress Semiconductor Corporation.
* Copyright (c) 2013-2021 ARM Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
@@ -19,8 +17,8 @@
*
* ----------------------------------------------------------------------
*
* $Date: 26. November 2019
* $Revision: V2.0.0
* $Date: 26. May 2021
* $Revision: V2.1.0
*
* Project: CMSIS-DAP Include
* Title: DAP.h Definitions
@@ -33,9 +31,9 @@
// DAP Firmware Version
#ifdef DAP_FW_V1
#define DAP_FW_VER "1.2.0"
#define DAP_FW_VER "1.3.0"
#else
#define DAP_FW_VER "2.0.0"
#define DAP_FW_VER "2.1.0"
#endif
// DAP Command IDs
@@ -65,6 +63,11 @@
#define ID_DAP_SWO_Status 0x1BU
#define ID_DAP_SWO_ExtendedStatus 0x1EU
#define ID_DAP_SWO_Data 0x1CU
#define ID_DAP_UART_Transport 0x1FU
#define ID_DAP_UART_Configure 0x20U
#define ID_DAP_UART_Control 0x22U
#define ID_DAP_UART_Status 0x23U
#define ID_DAP_UART_Transfer 0x21U
#define ID_DAP_QueueCommands 0x7EU
#define ID_DAP_ExecuteCommands 0x7FU
@@ -103,11 +106,6 @@
#define ID_DAP_Vendor30 0x9EU
#define ID_DAP_Vendor31 0x9FU
// DAP Extended range of Vendor Command IDs
#define ID_DAP_VendorExFirst 0xA0U
#define ID_DAP_VendorExLast 0xFEU
#define ID_DAP_Invalid 0xFFU
// DAP Status Code
@@ -118,13 +116,16 @@
#define DAP_ID_VENDOR 1U
#define DAP_ID_PRODUCT 2U
#define DAP_ID_SER_NUM 3U
#define DAP_ID_CMSIS_DAP_VER 4U
#define DAP_ID_FW_VER 4U // Deprecated alias of DAP_ID_CMSIS_DAP_VER for backwards compatibility.
#define DAP_ID_DAP_FW_VER 4U
#define DAP_ID_DEVICE_VENDOR 5U
#define DAP_ID_DEVICE_NAME 6U
#define DAP_ID_PRODUCT_FW_VER 7U
#define DAP_ID_BOARD_VENDOR 7U
#define DAP_ID_BOARD_NAME 8U
#define DAP_ID_PRODUCT_FW_VER 9U
#define DAP_ID_CAPABILITIES 0xF0U
#define DAP_ID_TIMESTAMP_CLOCK 0xF1U
#define DAP_ID_UART_RX_BUFFER_SIZE 0xFBU
#define DAP_ID_UART_TX_BUFFER_SIZE 0xFCU
#define DAP_ID_SWO_BUFFER_SIZE 0xFDU
#define DAP_ID_PACKET_COUNT 0xFEU
#define DAP_ID_PACKET_SIZE 0xFFU
@@ -174,6 +175,30 @@
#define DAP_SWO_STREAM_ERROR (1U<<6)
#define DAP_SWO_BUFFER_OVERRUN (1U<<7)
// DAP UART Transport
#define DAP_UART_TRANSPORT_NONE 0U
#define DAP_UART_TRANSPORT_USB_COM_PORT 1U
#define DAP_UART_TRANSPORT_DAP_COMMAND 2U
// DAP UART Control
#define DAP_UART_CONTROL_RX_ENABLE (1U<<0)
#define DAP_UART_CONTROL_RX_DISABLE (1U<<1)
#define DAP_UART_CONTROL_RX_BUF_FLUSH (1U<<2)
#define DAP_UART_CONTROL_TX_ENABLE (1U<<4)
#define DAP_UART_CONTROL_TX_DISABLE (1U<<5)
#define DAP_UART_CONTROL_TX_BUF_FLUSH (1U<<6)
// DAP UART Status
#define DAP_UART_STATUS_RX_ENABLED (1U<<0)
#define DAP_UART_STATUS_RX_DATA_LOST (1U<<1)
#define DAP_UART_STATUS_FRAMING_ERROR (1U<<2)
#define DAP_UART_STATUS_PARITY_ERROR (1U<<3)
#define DAP_UART_STATUS_TX_ENABLED (1U<<4)
// DAP UART Configure Error
#define DAP_UART_CFG_ERROR_DATA_BITS (1U<<0)
#define DAP_UART_CFG_ERROR_PARITY (1U<<1)
#define DAP_UART_CFG_ERROR_STOP_BITS (1U<<2)
// Debug Port Register Addresses
#define DP_IDCODE 0x00U // IDCODE Register (SW Read only)
@@ -271,17 +296,25 @@ extern void SWO_QueueTransfer (uint8_t *buf, uint32_t num);
extern void SWO_AbortTransfer (void);
extern void SWO_TransferComplete (void);
extern uint32_t UART_SWO_Mode (uint32_t enable);
extern uint32_t UART_SWO_Baudrate (uint32_t baudrate);
extern uint32_t UART_SWO_Control (uint32_t active);
extern void UART_SWO_Capture (uint8_t *buf, uint32_t num);
extern uint32_t UART_SWO_GetCount (void);
extern uint32_t SWO_Mode_UART (uint32_t enable);
extern uint32_t SWO_Baudrate_UART (uint32_t baudrate);
extern uint32_t SWO_Control_UART (uint32_t active);
extern void SWO_Capture_UART (uint8_t *buf, uint32_t num);
extern uint32_t SWO_GetCount_UART (void);
extern uint32_t Manchester_SWO_Mode (uint32_t enable);
extern uint32_t Manchester_SWO_Baudrate (uint32_t baudrate);
extern uint32_t Manchester_SWO_Control (uint32_t active);
extern void Manchester_SWO_Capture (uint8_t *buf, uint32_t num);
extern uint32_t Manchester_SWO_GetCount (void);
extern uint32_t SWO_Mode_Manchester (uint32_t enable);
extern uint32_t SWO_Baudrate_Manchester (uint32_t baudrate);
extern uint32_t SWO_Control_Manchester (uint32_t active);
extern void SWO_Capture_Manchester (uint8_t *buf, uint32_t num);
extern uint32_t SWO_GetCount_Manchester (void);
extern uint32_t UART_Transport (const uint8_t *request, uint8_t *response);
extern uint32_t UART_Configure (const uint8_t *request, uint8_t *response);
extern uint32_t UART_Control (const uint8_t *request, uint8_t *response);
extern uint32_t UART_Status (uint8_t *response);
extern uint32_t UART_Transfer (const uint8_t *request, uint8_t *response);
extern uint8_t USB_COM_PORT_Activate (uint32_t cmd);
extern uint32_t DAP_ProcessVendorCommand (const uint8_t *request, uint8_t *response);
extern uint32_t DAP_ProcessCommand (const uint8_t *request, uint8_t *response);
core/DAP/DAP.c → core/DAP/Source/DAP.c
+74 -75
View File
@@ -1,7 +1,5 @@
/*
* Copyright (c) 2013-2020 ARM Limited. All rights reserved.
* Copyright 2019, Cypress Semiconductor Corporation
* or a subsidiary of Cypress Semiconductor Corporation.
* Copyright (c) 2013-2021 ARM Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
@@ -19,8 +17,8 @@
*
* ----------------------------------------------------------------------
*
* $Date: 1. December 2017
* $Revision: V2.0.0
* $Date: 16. June 2021
* $Revision: V2.1.0
*
* Project: CMSIS-DAP Source
* Title: DAP.c CMSIS-DAP Commands
@@ -28,13 +26,8 @@
*---------------------------------------------------------------------------*/
#include <string.h>
#ifdef RTE_CMSIS_RTOS
#include "cmsis_os.h"
#endif
#include "DAP_config.h"
#include "DAP.h"
//#include "info.h"
//#include "dap_strings.h"
#if (DAP_PACKET_SIZE < 64U)
@@ -66,10 +59,6 @@ volatile uint8_t DAP_TransferAbort; // Transfer Abort Flag
static const char DAP_FW_Ver [] = DAP_FW_VER;
#if TARGET_DEVICE_FIXED
static const char TargetDeviceVendor [] = TARGET_DEVICE_VENDOR;
static const char TargetDeviceName [] = TARGET_DEVICE_NAME;
#endif
// Get DAP Information
@@ -89,24 +78,24 @@ static uint8_t DAP_Info(uint8_t id, uint8_t *info) {
case DAP_ID_SER_NUM:
length = DAP_GetSerNumString((char *)info);
break;
case DAP_ID_CMSIS_DAP_VER:
case DAP_ID_DAP_FW_VER:
length = (uint8_t)sizeof(DAP_FW_Ver);
memcpy(info, DAP_FW_Ver, length);
break;
case DAP_ID_DEVICE_VENDOR:
#if TARGET_DEVICE_FIXED
length = (uint8_t)sizeof(TargetDeviceVendor);
memcpy(info, TargetDeviceVendor, length);
#endif
length = DAP_GetTargetDeviceVendorString((char *)info);
break;
case DAP_ID_DEVICE_NAME:
#if TARGET_DEVICE_FIXED
length = (uint8_t)sizeof(TargetDeviceName);
memcpy(info, TargetDeviceName, length);
#endif
length = DAP_GetTargetDeviceNameString((char *)info);
break;
case DAP_ID_BOARD_VENDOR:
length = DAP_GetTargetBoardVendorString((char *)info);
break;
case DAP_ID_BOARD_NAME:
length = DAP_GetTargetBoardNameString((char *)info);
break;
case DAP_ID_PRODUCT_FW_VER:
length = DAP_ProductFirmwareVerString((char *)info);
length = DAP_GetProductFirmwareVersionString((char *)info);
break;
case DAP_ID_CAPABILITIES:
info[0] = ((DAP_SWD != 0) ? (1U << 0) : 0U) |
@@ -115,16 +104,37 @@ static uint8_t DAP_Info(uint8_t id, uint8_t *info) {
((SWO_MANCHESTER != 0) ? (1U << 3) : 0U) |
/* Atomic Commands */ (1U << 4) |
((TIMESTAMP_CLOCK != 0U) ? (1U << 5) : 0U) |
((SWO_STREAM != 0U) ? (1U << 6) : 0U);
length = 1U;
((SWO_STREAM != 0U) ? (1U << 6) : 0U) |
((DAP_UART != 0U) ? (1U << 7) : 0U);
info[1] = ((DAP_UART_USB_COM_PORT != 0) ? (1U << 0) : 0U);
length = 2U;
break;
case DAP_ID_TIMESTAMP_CLOCK:
#if (TIMESTAMP_CLOCK != 0U)
#if (TIMESTAMP_CLOCK != 0U)
info[0] = (uint8_t)(TIMESTAMP_CLOCK >> 0);
info[1] = (uint8_t)(TIMESTAMP_CLOCK >> 8);
info[2] = (uint8_t)(TIMESTAMP_CLOCK >> 16);
info[3] = (uint8_t)(TIMESTAMP_CLOCK >> 24);
length = 4U;
#endif
break;
case DAP_ID_UART_RX_BUFFER_SIZE:
#if (DAP_UART != 0)
info[0] = (uint8_t)(DAP_UART_RX_BUFFER_SIZE >> 0);
info[1] = (uint8_t)(DAP_UART_RX_BUFFER_SIZE >> 8);
info[2] = (uint8_t)(DAP_UART_RX_BUFFER_SIZE >> 16);
info[3] = (uint8_t)(DAP_UART_RX_BUFFER_SIZE >> 24);
length = 4U;
#endif
break;
case DAP_ID_UART_TX_BUFFER_SIZE:
#if (DAP_UART != 0)
info[0] = (uint8_t)(DAP_UART_TX_BUFFER_SIZE >> 0);
info[1] = (uint8_t)(DAP_UART_TX_BUFFER_SIZE >> 8);
info[2] = (uint8_t)(DAP_UART_TX_BUFFER_SIZE >> 16);
info[3] = (uint8_t)(DAP_UART_TX_BUFFER_SIZE >> 24);
length = 4U;
#endif
break;
case DAP_ID_SWO_BUFFER_SIZE:
@@ -217,7 +227,7 @@ static uint32_t DAP_Connect(const uint8_t *request, uint8_t *response) {
} else {
port = *request;
}
switch (port) {
#if (DAP_SWD != 0)
case DAP_PORT_SWD:
@@ -276,9 +286,9 @@ static uint32_t DAP_SWJ_Pins(const uint8_t *request, uint8_t *response) {
uint32_t select;
uint32_t wait;
uint32_t timestamp;
value = (uint32_t) *(request+0);
select = (uint32_t) *(request+1);
select = (uint32_t) *(request+1);
wait = (uint32_t)(*(request+2) << 0) |
(uint32_t)(*(request+3) << 8) |
(uint32_t)(*(request+4) << 16) |
@@ -310,7 +320,7 @@ static uint32_t DAP_SWJ_Pins(const uint8_t *request, uint8_t *response) {
if (wait != 0U) {
#if (TIMESTAMP_CLOCK != 0U)
if (wait > 3000000U) {
if (wait > 3000000U) {
wait = 3000000U;
}
#if (TIMESTAMP_CLOCK >= 1000000U)
@@ -423,7 +433,7 @@ static uint32_t DAP_SWJ_Sequence(const uint8_t *request, uint8_t *response) {
uint32_t count;
count = *request++;
if (count == 0U) {
if (count == 0U) {
count = 256U;
}
@@ -452,7 +462,7 @@ static uint32_t DAP_SWD_Configure(const uint8_t *request, uint8_t *response) {
value = *request;
DAP_Data.swd_conf.turnaround = (value & 0x03U) + 1U;
DAP_Data.swd_conf.data_phase = (value & 0x04U) ? 1U : 0U;
*response = DAP_OK;
#else
*response = DAP_ERROR;
@@ -486,7 +496,7 @@ static uint32_t DAP_SWD_Sequence(const uint8_t *request, uint8_t *response) {
while (sequence_count--) {
sequence_info = *request++;
count = sequence_info & SWD_SEQUENCE_CLK;
if (count == 0U) {
if (count == 0U) {
count = 64U;
}
count = (count + 7U) / 8U;
@@ -636,7 +646,7 @@ static uint32_t DAP_JTAG_IDCode(const uint8_t *request, uint8_t *response) {
id_error:
#endif
*response = DAP_ERROR;
return ((1U << 16) | 1U);
return ((1U << 16) | 1U);
}
@@ -650,11 +660,11 @@ static uint32_t DAP_TransferConfigure(const uint8_t *request, uint8_t *response)
DAP_Data.transfer.idle_cycles = *(request+0);
DAP_Data.transfer.retry_count = (uint16_t) *(request+1) |
(uint16_t)(*(request+2) << 8);
DAP_Data.transfer.match_retry = (uint16_t) *(request+3) |
DAP_Data.transfer.match_retry = (uint16_t) *(request+3) |
(uint16_t)(*(request+4) << 8);
*response = DAP_OK;
return ((5U << 16) | 1U);
return ((5U << 16) | 1U);
}
@@ -717,7 +727,7 @@ static uint32_t DAP_SWD_Transfer(const uint8_t *request, uint8_t *response) {
} while ((response_value == DAP_TRANSFER_WAIT) && retry-- && !DAP_TransferAbort);
post_read = 0U;
}
if (response_value != DAP_TRANSFER_OK) {
if (response_value != DAP_TRANSFER_OK) {
break;
}
// Store previous AP data
@@ -1392,14 +1402,14 @@ static uint32_t DAP_JTAG_TransferBlock(const uint8_t *request, uint8_t *response
// Device index (JTAP TAP)
DAP_Data.jtag_dev.index = *request++;
if (DAP_Data.jtag_dev.index >= DAP_Data.jtag_dev.count) {
if (DAP_Data.jtag_dev.index >= DAP_Data.jtag_dev.count) {
goto end;
}
request_count = (uint32_t)(*(request+0) << 0) |
request_count = (uint32_t)(*(request+0) << 0) |
(uint32_t)(*(request+1) << 8);
request += 2;
if (request_count == 0U) {
if (request_count == 0U) {
goto end;
}
@@ -1555,7 +1565,7 @@ static uint32_t DAP_JTAG_WriteAbort(const uint8_t *request, uint8_t *response) {
DAP_Data.jtag_dev.index = *request;
if (DAP_Data.jtag_dev.index >= DAP_Data.jtag_dev.count) {
*response = DAP_ERROR;
return (1U);
return (1U);
}
// Select JTAG chain
@@ -1571,7 +1581,7 @@ static uint32_t DAP_JTAG_WriteAbort(const uint8_t *request, uint8_t *response) {
JTAG_WriteAbort(data);
*response = DAP_OK;
return (1U);
return (1U);
}
#endif
@@ -1616,16 +1626,6 @@ __WEAK uint32_t DAP_ProcessVendorCommand(const uint8_t *request, uint8_t *respon
return ((1U << 16) | 1U);
}
// Process DAP Vendor extended command request and prepare response
// Default function (can be overridden)
// request: pointer to request data
// response: pointer to response data
// return: number of bytes in response (lower 16 bits)
// number of bytes in request (upper 16 bits)
__WEAK uint32_t DAP_ProcessVendorCommandEx(const uint8_t *request, uint8_t *response) {
*response = ID_DAP_Invalid;
return ((1U << 16) | 1U);
}
// Process DAP command request and prepare response
// request: pointer to request data
@@ -1639,10 +1639,6 @@ uint32_t DAP_ProcessCommand(const uint8_t *request, uint8_t *response) {
return DAP_ProcessVendorCommand(request, response);
}
if ((*request >= ID_DAP_VendorExFirst) && (*request <= ID_DAP_VendorExLast)) {
return DAP_ProcessVendorCommandEx(request, response);
}
*response++ = *request;
switch (*request++) {
@@ -1735,6 +1731,24 @@ uint32_t DAP_ProcessCommand(const uint8_t *request, uint8_t *response) {
break;
#endif
#if (DAP_UART != 0)
case ID_DAP_UART_Transport:
num = UART_Transport(request, response);
break;
case ID_DAP_UART_Configure:
num = UART_Configure(request, response);
break;
case ID_DAP_UART_Control:
num = UART_Control(request, response);
break;
case ID_DAP_UART_Status:
num = UART_Status(response);
break;
case ID_DAP_UART_Transfer:
num = UART_Transfer(request, response);
break;
#endif
default:
*(response-1) = ID_DAP_Invalid;
return ((1U << 16) | 1U);
@@ -1761,7 +1775,7 @@ uint32_t DAP_ExecuteCommand(const uint8_t *request, uint8_t *response) {
n = DAP_ProcessCommand(request, response);
num += n;
request += (uint16_t)(n >> 16);
response += (uint16_t) n;
response += (uint16_t) n;
}
return (num);
}
@@ -1775,6 +1789,8 @@ void DAP_Setup(void) {
// Default settings
DAP_Data.debug_port = 0U;
DAP_Data.fast_clock = 0U;
DAP_Data.clock_delay = CLOCK_DELAY(DAP_DEFAULT_SWJ_CLOCK);
DAP_Data.transfer.idle_cycles = 0U;
DAP_Data.transfer.retry_count = 100U;
DAP_Data.transfer.match_retry = 0U;
@@ -1787,22 +1803,5 @@ void DAP_Setup(void) {
DAP_Data.jtag_dev.count = 0U;
#endif
if (DAP_DEFAULT_SWJ_CLOCK >= MAX_SWJ_CLOCK(DELAY_FAST_CYCLES)) {
DAP_Data.fast_clock = 1U;
DAP_Data.clock_delay = 1U;
} else {
DAP_Data.fast_clock = 0U;
uint32_t delay = ((CPU_CLOCK/2U) + (DAP_DEFAULT_SWJ_CLOCK - 1U)) / DAP_DEFAULT_SWJ_CLOCK;
if (delay > IO_PORT_WRITE_CYCLES) {
delay -= IO_PORT_WRITE_CYCLES;
delay = (delay + (DELAY_SLOW_CYCLES - 1U)) / DELAY_SLOW_CYCLES;
} else {
delay = 1U;
}
DAP_Data.clock_delay = delay;
}
DAP_SETUP(); // Device specific setup
}
core/DAP/Source/DAP_vendor.c
+100
View File
@@ -0,0 +1,100 @@
/*
* Copyright (c) 2013-2017 ARM Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* ----------------------------------------------------------------------
*
* $Date: 1. December 2017
* $Revision: V2.0.0
*
* Project: CMSIS-DAP Source
* Title: DAP_vendor.c CMSIS-DAP Vendor Commands
*
*---------------------------------------------------------------------------*/
#include "DAP_config.h"
#include "DAP.h"
//**************************************************************************************************
/**
\defgroup DAP_Vendor_Adapt_gr Adapt Vendor Commands
\ingroup DAP_Vendor_gr
@{
The file DAP_vendor.c provides template source code for extension of a Debug Unit with
Vendor Commands. Copy this file to the project folder of the Debug Unit and add the
file to the MDK-ARM project under the file group Configuration.
*/
/** Process DAP Vendor Command and prepare Response Data
\param request pointer to request data
\param response pointer to response data
\return number of bytes in response (lower 16 bits)
number of bytes in request (upper 16 bits)
*/
uint32_t DAP_ProcessVendorCommand(const uint8_t *request, uint8_t *response) {
uint32_t num = (1U << 16) | 1U;
*response++ = *request; // copy Command ID
switch (*request++) { // first byte in request is Command ID
case ID_DAP_Vendor0:
#if 0 // example user command
num += 1U << 16; // increment request count
if (*request == 1U) { // when first command data byte is 1
*response++ = 'X'; // send 'X' as response
num++; // increment response count
}
#endif
break;
case ID_DAP_Vendor1: break;
case ID_DAP_Vendor2: break;
case ID_DAP_Vendor3: break;
case ID_DAP_Vendor4: break;
case ID_DAP_Vendor5: break;
case ID_DAP_Vendor6: break;
case ID_DAP_Vendor7: break;
case ID_DAP_Vendor8: break;
case ID_DAP_Vendor9: break;
case ID_DAP_Vendor10: break;
case ID_DAP_Vendor11: break;
case ID_DAP_Vendor12: break;
case ID_DAP_Vendor13: break;
case ID_DAP_Vendor14: break;
case ID_DAP_Vendor15: break;
case ID_DAP_Vendor16: break;
case ID_DAP_Vendor17: break;
case ID_DAP_Vendor18: break;
case ID_DAP_Vendor19: break;
case ID_DAP_Vendor20: break;
case ID_DAP_Vendor21: break;
case ID_DAP_Vendor22: break;
case ID_DAP_Vendor23: break;
case ID_DAP_Vendor24: break;
case ID_DAP_Vendor25: break;
case ID_DAP_Vendor26: break;
case ID_DAP_Vendor27: break;
case ID_DAP_Vendor28: break;
case ID_DAP_Vendor29: break;
case ID_DAP_Vendor30: break;
case ID_DAP_Vendor31: break;
}
return (num);
}
///@}
core/DAP/JTAG_DP.c → core/DAP/Source/JTAG_DP.c
View File
core/DAP/SWO.c → core/DAP/Source/SWO.c
+39 -41
View File
@@ -1,5 +1,5 @@
/*
* Copyright (c) 2013-2017 ARM Limited. All rights reserved.
* Copyright (c) 2013-2021 ARM Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
@@ -17,8 +17,8 @@
*
* ----------------------------------------------------------------------
*
* $Date: 1. December 2017
* $Revision: V2.0.0
* $Date: 29. March 2021
* $Revision: V2.0.1
*
* Project: CMSIS-DAP Source
* Title: SWO.c CMSIS-DAP SWO I/O
@@ -32,6 +32,8 @@
#endif
#if (SWO_STREAM != 0)
#include "cmsis_os2.h"
#define osObjectsExternal
#include "osObjects.h"
#endif
#if (SWO_STREAM != 0)
@@ -42,15 +44,11 @@
#if (SWO_UART != 0)
#ifndef SWO_USART_PORT
#define SWO_USART_PORT 0 /* USART Port Number */
#endif
// USART Driver
#define _USART_Driver_(n) Driver_USART##n
#define USART_Driver_(n) _USART_Driver_(n)
extern ARM_DRIVER_USART USART_Driver_(SWO_USART_PORT);
#define pUSART (&USART_Driver_(SWO_USART_PORT))
extern ARM_DRIVER_USART USART_Driver_(SWO_UART_DRIVER);
#define pUSART (&USART_Driver_(SWO_UART_DRIVER))
static uint8_t USART_Ready = 0U;
@@ -150,10 +148,10 @@ static void USART_Callback (uint32_t event) {
}
}
// Enable or disable UART SWO Mode
// Enable or disable SWO Mode (UART)
// enable: enable flag
// return: 1 - Success, 0 - Error
__WEAK uint32_t UART_SWO_Mode (uint32_t enable) {
__WEAK uint32_t SWO_Mode_UART (uint32_t enable) {
int32_t status;
USART_Ready = 0U;
@@ -177,10 +175,10 @@ __WEAK uint32_t UART_SWO_Mode (uint32_t enable) {
return (1U);
}
// Configure UART SWO Baudrate
// Configure SWO Baudrate (UART)
// baudrate: requested baudrate
// return: actual baudrate or 0 when not configured
__WEAK uint32_t UART_SWO_Baudrate (uint32_t baudrate) {
__WEAK uint32_t SWO_Baudrate_UART (uint32_t baudrate) {
int32_t status;
uint32_t index;
uint32_t num;
@@ -223,10 +221,10 @@ __WEAK uint32_t UART_SWO_Baudrate (uint32_t baudrate) {
return (baudrate);
}
// Control UART SWO Capture
// Control SWO Capture (UART)
// active: active flag
// return: 1 - Success, 0 - Error
__WEAK uint32_t UART_SWO_Control (uint32_t active) {
__WEAK uint32_t SWO_Control_UART (uint32_t active) {
int32_t status;
if (active) {
@@ -252,17 +250,17 @@ __WEAK uint32_t UART_SWO_Control (uint32_t active) {
return (1U);
}
// Start UART SWO Capture
// Start SWO Capture (UART)
// buf: pointer to buffer for capturing
// num: number of bytes to capture
__WEAK void UART_SWO_Capture (uint8_t *buf, uint32_t num) {
__WEAK void SWO_Capture_UART (uint8_t *buf, uint32_t num) {
TraceBlockSize = num;
pUSART->Receive(buf, num);
}
// Get UART SWO Pending Trace Count
// Get SWO Pending Trace Count (UART)
// return: number of pending trace data bytes
__WEAK uint32_t UART_SWO_GetCount (void) {
__WEAK uint32_t SWO_GetCount_UART (void) {
uint32_t count;
if (pUSART->GetStatus().rx_busy) {
@@ -278,36 +276,36 @@ __WEAK uint32_t UART_SWO_GetCount (void) {
#if (SWO_MANCHESTER != 0)
// Enable or disable Manchester SWO Mode
// Enable or disable SWO Mode (Manchester)
// enable: enable flag
// return: 1 - Success, 0 - Error
__WEAK uint32_t Manchester_SWO_Mode (uint32_t enable) {
__WEAK uint32_t SWO_Mode_Manchester (uint32_t enable) {
return (0U);
}
// Configure Manchester SWO Baudrate
// Configure SWO Baudrate (Manchester)
// baudrate: requested baudrate
// return: actual baudrate or 0 when not configured
__WEAK uint32_t Manchester_SWO_Baudrate (uint32_t baudrate) {
__WEAK uint32_t SWO_Baudrate_Manchester (uint32_t baudrate) {
return (0U);
}
// Control Manchester SWO Capture
// Control SWO Capture (Manchester)
// active: active flag
// return: 1 - Success, 0 - Error
__WEAK uint32_t Manchester_SWO_Control (uint32_t active) {
__WEAK uint32_t SWO_Control_Manchester (uint32_t active) {
return (0U);
}
// Start Manchester SWO Capture
// Start SWO Capture (Manchester)
// buf: pointer to buffer for capturing
// num: number of bytes to capture
__WEAK void Manchester_SWO_Capture (uint8_t *buf, uint32_t num) {
__WEAK void SWO_Capture_Manchester (uint8_t *buf, uint32_t num) {
}
// Get Manchester SWO Pending Trace Count
// Get SWO Pending Trace Count (Manchester)
// return: number of pending trace data bytes
__WEAK uint32_t Manchester_SWO_GetCount (void) {
__WEAK uint32_t SWO_GetCount_Manchester (void) {
}
#endif /* (SWO_MANCHESTER != 0) */
@@ -351,13 +349,13 @@ static void ResumeTrace (void) {
#if (SWO_UART != 0)
case DAP_SWO_UART:
TraceStatus = DAP_SWO_CAPTURE_ACTIVE;
UART_SWO_Capture(&TraceBuf[index_i], 1U);
SWO_Capture_UART(&TraceBuf[index_i], 1U);
break;
#endif
#if (SWO_MANCHESTER != 0)
case DAP_SWO_MANCHESTER:
TraceStatus = DAP_SWO_CAPTURE_ACTIVE;
Manchester_SWO_Capture(&TraceBuf[index_i], 1U);
SWO_Capture_Manchester(&TraceBuf[index_i], 1U);
break;
#endif
default:
@@ -379,12 +377,12 @@ static uint32_t GetTraceCount (void) {
switch (TraceMode) {
#if (SWO_UART != 0)
case DAP_SWO_UART:
count += UART_SWO_GetCount();
count += SWO_GetCount_UART();
break;
#endif
#if (SWO_MANCHESTER != 0)
case DAP_SWO_MANCHESTER:
count += Manchester_SWO_GetCount();
count += SWO_GetCount_Manchester();
break;
#endif
default:
@@ -471,12 +469,12 @@ uint32_t SWO_Mode (const uint8_t *request, uint8_t *response) {
switch (TraceMode) {
#if (SWO_UART != 0)
case DAP_SWO_UART:
UART_SWO_Mode(0U);
SWO_Mode_UART(0U);
break;
#endif
#if (SWO_MANCHESTER != 0)
case DAP_SWO_MANCHESTER:
Manchester_SWO_Mode(0U);
SWO_Mode_Manchester(0U);
break;
#endif
default:
@@ -489,12 +487,12 @@ uint32_t SWO_Mode (const uint8_t *request, uint8_t *response) {
break;
#if (SWO_UART != 0)
case DAP_SWO_UART:
result = UART_SWO_Mode(1U);
result = SWO_Mode_UART(1U);
break;
#endif
#if (SWO_MANCHESTER != 0)
case DAP_SWO_MANCHESTER:
result = Manchester_SWO_Mode(1U);
result = SWO_Mode_Manchester(1U);
break;
#endif
default:
@@ -535,12 +533,12 @@ uint32_t SWO_Baudrate (const uint8_t *request, uint8_t *response) {
switch (TraceMode) {
#if (SWO_UART != 0)
case DAP_SWO_UART:
baudrate = UART_SWO_Baudrate(baudrate);
baudrate = SWO_Baudrate_UART(baudrate);
break;
#endif
#if (SWO_MANCHESTER != 0)
case DAP_SWO_MANCHESTER:
baudrate = Manchester_SWO_Baudrate(baudrate);
baudrate = SWO_Baudrate_Manchester(baudrate);
break;
#endif
default:
@@ -579,12 +577,12 @@ uint32_t SWO_Control (const uint8_t *request, uint8_t *response) {
switch (TraceMode) {
#if (SWO_UART != 0)
case DAP_SWO_UART:
result = UART_SWO_Control(active);
result = SWO_Control_UART(active);
break;
#endif
#if (SWO_MANCHESTER != 0)
case DAP_SWO_MANCHESTER:
result = Manchester_SWO_Control(active);
result = SWO_Control_Manchester(active);
break;
#endif
default:
core/DAP/SW_DP.c → core/DAP/Source/SW_DP.c
View File
core/DAP/Source/UART.c
+652
View File
@@ -0,0 +1,652 @@
/*
* Copyright (c) 2021 ARM Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* ----------------------------------------------------------------------
*
* $Date: 1. March 2021
* $Revision: V1.0.0
*
* Project: CMSIS-DAP Source
* Title: UART.c CMSIS-DAP UART
*
*---------------------------------------------------------------------------*/
#include "DAP_config.h"
#include "DAP.h"
#if (DAP_UART != 0)
#ifdef DAP_FW_V1
#error "UART Communication Port not supported in DAP V1!"
#endif
#include "Driver_USART.h"
#include "cmsis_os2.h"
#include <string.h>
#define UART_RX_BLOCK_SIZE 32U /* Uart Rx Block Size (must be 2^n) */
// USART Driver
#define _USART_Driver_(n) Driver_USART##n
#define USART_Driver_(n) _USART_Driver_(n)
extern ARM_DRIVER_USART USART_Driver_(DAP_UART_DRIVER);
#define pUSART (&USART_Driver_(DAP_UART_DRIVER))
// UART Configuration
#if (DAP_UART_USB_COM_PORT != 0)
static uint8_t UartTransport = DAP_UART_TRANSPORT_USB_COM_PORT;
#else
static uint8_t UartTransport = DAP_UART_TRANSPORT_NONE;
#endif
// UART Flags
static uint8_t UartConfigured = 0U;
static uint8_t UartReceiveEnabled = 0U;
static uint8_t UartTransmitEnabled = 0U;
static uint8_t UartTransmitActive = 0U;
// UART TX Buffer
static uint8_t UartTxBuf[DAP_UART_TX_BUFFER_SIZE];
static volatile uint32_t UartTxIndexI = 0U;
static volatile uint32_t UartTxIndexO = 0U;
// UART RX Buffer
static uint8_t UartRxBuf[DAP_UART_RX_BUFFER_SIZE];
static volatile uint32_t UartRxIndexI = 0U;
static volatile uint32_t UartRxIndexO = 0U;
// Uart Errors
static volatile uint8_t UartErrorRxDataLost = 0U;
static volatile uint8_t UartErrorFraming = 0U;
static volatile uint8_t UartErrorParity = 0U;
// UART Transmit
static uint32_t UartTxNum = 0U;
// Function prototypes
static uint8_t UART_Init (void);
static void UART_Uninit (void);
static uint8_t UART_Get_Status (void);
static uint8_t UART_Receive_Enable (void);
static uint8_t UART_Transmit_Enable (void);
static void UART_Receive_Disable (void);
static void UART_Transmit_Disable (void);
static void UART_Receive_Flush (void);
static void UART_Transmit_Flush (void);
static void UART_Receive (void);
static void UART_Transmit (void);
// USART Driver Callback function
// event: event mask
static void USART_Callback (uint32_t event) {
if (event & ARM_USART_EVENT_SEND_COMPLETE) {
UartTxIndexO += UartTxNum;
UartTransmitActive = 0U;
UART_Transmit();
}
if (event & ARM_USART_EVENT_RECEIVE_COMPLETE) {
UartRxIndexI += UART_RX_BLOCK_SIZE;
UART_Receive();
}
if (event & ARM_USART_EVENT_RX_OVERFLOW) {
UartErrorRxDataLost = 1U;
}
if (event & ARM_USART_EVENT_RX_FRAMING_ERROR) {
UartErrorFraming = 1U;
}
if (event & ARM_USART_EVENT_RX_PARITY_ERROR) {
UartErrorParity = 1U;
}
}
// Init UART
// return: DAP_OK or DAP_ERROR
static uint8_t UART_Init (void) {
int32_t status;
uint8_t ret = DAP_ERROR;
UartConfigured = 0U;
UartReceiveEnabled = 0U;
UartTransmitEnabled = 0U;
UartTransmitActive = 0U;
UartErrorRxDataLost = 0U;
UartErrorFraming = 0U;
UartErrorParity = 0U;
UartTxIndexI = 0U;
UartTxIndexO = 0U;
UartRxIndexI = 0U;
UartRxIndexO = 0U;
UartTxNum = 0U;
status = pUSART->Initialize(USART_Callback);
if (status == ARM_DRIVER_OK) {
status = pUSART->PowerControl(ARM_POWER_FULL);
}
if (status == ARM_DRIVER_OK) {
ret = DAP_OK;
}
return (ret);
}
// Un-Init UART
static void UART_Uninit (void) {
UartConfigured = 0U;
pUSART->PowerControl(ARM_POWER_OFF);
pUSART->Uninitialize();
}
// Get UART Status
// return: status
static uint8_t UART_Get_Status (void) {
uint8_t status = 0U;
if (UartReceiveEnabled != 0U) {
status |= DAP_UART_STATUS_RX_ENABLED;
}
if (UartErrorRxDataLost != 0U) {
UartErrorRxDataLost = 0U;
status |= DAP_UART_STATUS_RX_DATA_LOST;
}
if (UartErrorFraming != 0U) {
UartErrorFraming = 0U;
status |= DAP_UART_STATUS_FRAMING_ERROR;
}
if (UartErrorParity != 0U) {
UartErrorParity = 0U;
status |= DAP_UART_STATUS_PARITY_ERROR;
}
if (UartTransmitEnabled != 0U) {
status |= DAP_UART_STATUS_TX_ENABLED;
}
return (status);
}
// Enable UART Receive
// return: DAP_OK or DAP_ERROR
static uint8_t UART_Receive_Enable (void) {
int32_t status;
uint8_t ret = DAP_ERROR;
if (UartReceiveEnabled == 0U) {
// Flush Buffers
UartRxIndexI = 0U;
UartRxIndexO = 0U;
UART_Receive();
status = pUSART->Control(ARM_USART_CONTROL_RX, 1U);
if (status == ARM_DRIVER_OK) {
UartReceiveEnabled = 1U;
ret = DAP_OK;
}
} else {
ret = DAP_OK;
}
return (ret);
}
// Enable UART Transmit
// return: DAP_OK or DAP_ERROR
static uint8_t UART_Transmit_Enable (void) {
int32_t status;
uint8_t ret = DAP_ERROR;
if (UartTransmitEnabled == 0U) {
// Flush Buffers
UartTransmitActive = 0U;
UartTxIndexI = 0U;
UartTxIndexO = 0U;
UartTxNum = 0U;
status = pUSART->Control(ARM_USART_CONTROL_TX, 1U);
if (status == ARM_DRIVER_OK) {
UartTransmitEnabled = 1U;
ret = DAP_OK;
}
} else {
ret = DAP_OK;
}
return (ret);
}
// Disable UART Receive
static void UART_Receive_Disable (void) {
if (UartReceiveEnabled != 0U) {
pUSART->Control(ARM_USART_CONTROL_RX, 0U);
pUSART->Control(ARM_USART_ABORT_RECEIVE, 0U);
UartReceiveEnabled = 0U;
}
}
// Disable UART Transmit
static void UART_Transmit_Disable (void) {
if (UartTransmitEnabled != 0U) {
pUSART->Control(ARM_USART_ABORT_SEND, 0U);
pUSART->Control(ARM_USART_CONTROL_TX, 0U);
UartTransmitActive = 0U;
UartTransmitEnabled = 0U;
}
}
// Flush UART Receive buffer
static void UART_Receive_Flush (void) {
pUSART->Control(ARM_USART_ABORT_RECEIVE, 0U);
UartRxIndexI = 0U;
UartRxIndexO = 0U;
if (UartReceiveEnabled != 0U) {
UART_Receive();
}
}
// Flush UART Transmit buffer
static void UART_Transmit_Flush (void) {
pUSART->Control(ARM_USART_ABORT_SEND, 0U);
UartTransmitActive = 0U;
UartTxIndexI = 0U;
UartTxIndexO = 0U;
UartTxNum = 0U;
}
// Receive data from target via UART
static void UART_Receive (void) {
uint32_t index;
index = UartRxIndexI & (DAP_UART_RX_BUFFER_SIZE - 1U);
pUSART->Receive(&UartRxBuf[index], UART_RX_BLOCK_SIZE);
}
// Transmit available data to target via UART
static void UART_Transmit (void) {
uint32_t count;
uint32_t index;
count = UartTxIndexI - UartTxIndexO;
index = UartTxIndexO & (DAP_UART_TX_BUFFER_SIZE - 1U);
if (count != 0U) {
if ((index + count) <= DAP_UART_TX_BUFFER_SIZE) {
UartTxNum = count;
} else {
UartTxNum = DAP_UART_TX_BUFFER_SIZE - index;
}
UartTransmitActive = 1U;
pUSART->Send(&UartTxBuf[index], UartTxNum);
}
}
// Process UART Transport command and prepare response
// request: pointer to request data
// response: pointer to response data
// return: number of bytes in response (lower 16 bits)
// number of bytes in request (upper 16 bits)
uint32_t UART_Transport (const uint8_t *request, uint8_t *response) {
uint8_t transport;
uint8_t ret = DAP_ERROR;
transport = *request;
switch (transport) {
case DAP_UART_TRANSPORT_NONE:
switch (UartTransport) {
case DAP_UART_TRANSPORT_NONE:
ret = DAP_OK;
break;
case DAP_UART_TRANSPORT_USB_COM_PORT:
#if (DAP_UART_USB_COM_PORT != 0)
USB_COM_PORT_Activate(0U);
UartTransport = DAP_UART_TRANSPORT_NONE;
ret = DAP_OK;
#endif
break;
case DAP_UART_TRANSPORT_DAP_COMMAND:
UART_Receive_Disable();
UART_Transmit_Disable();
UART_Uninit();
UartTransport = DAP_UART_TRANSPORT_NONE;
ret= DAP_OK;
break;
}
break;
case DAP_UART_TRANSPORT_USB_COM_PORT:
switch (UartTransport) {
case DAP_UART_TRANSPORT_NONE:
#if (DAP_UART_USB_COM_PORT != 0)
if (USB_COM_PORT_Activate(1U) == 0U) {
UartTransport = DAP_UART_TRANSPORT_USB_COM_PORT;
ret = DAP_OK;
}
#endif
break;
case DAP_UART_TRANSPORT_USB_COM_PORT:
ret = DAP_OK;
break;
case DAP_UART_TRANSPORT_DAP_COMMAND:
UART_Receive_Disable();
UART_Transmit_Disable();
UART_Uninit();
UartTransport = DAP_UART_TRANSPORT_NONE;
#if (DAP_UART_USB_COM_PORT != 0)
if (USB_COM_PORT_Activate(1U) == 0U) {
UartTransport = DAP_UART_TRANSPORT_USB_COM_PORT;
ret = DAP_OK;
}
#endif
break;
}
break;
case DAP_UART_TRANSPORT_DAP_COMMAND:
switch (UartTransport) {
case DAP_UART_TRANSPORT_NONE:
ret = UART_Init();
if (ret == DAP_OK) {
UartTransport = DAP_UART_TRANSPORT_DAP_COMMAND;
}
break;
case DAP_UART_TRANSPORT_USB_COM_PORT:
#if (DAP_UART_USB_COM_PORT != 0)
USB_COM_PORT_Activate(0U);
UartTransport = DAP_UART_TRANSPORT_NONE;
#endif
ret = UART_Init();
if (ret == DAP_OK) {
UartTransport = DAP_UART_TRANSPORT_DAP_COMMAND;
}
break;
case DAP_UART_TRANSPORT_DAP_COMMAND:
ret = DAP_OK;
break;
}
break;
default:
break;
}
*response = ret;
return ((1U << 16) | 1U);
}
// Process UART Configure command and prepare response
// request: pointer to request data
// response: pointer to response data
// return: number of bytes in response (lower 16 bits)
// number of bytes in request (upper 16 bits)
uint32_t UART_Configure (const uint8_t *request, uint8_t *response) {
uint8_t control, status;
uint32_t baudrate;
int32_t result;
if (UartTransport != DAP_UART_TRANSPORT_DAP_COMMAND) {
status = DAP_UART_CFG_ERROR_DATA_BITS |
DAP_UART_CFG_ERROR_PARITY |
DAP_UART_CFG_ERROR_STOP_BITS;
baudrate = 0U; // baudrate error
} else {
status = 0U;
control = *request;
baudrate = (uint32_t)(*(request+1) << 0) |
(uint32_t)(*(request+2) << 8) |
(uint32_t)(*(request+3) << 16) |
(uint32_t)(*(request+4) << 24);
result = pUSART->Control(control |
ARM_USART_MODE_ASYNCHRONOUS |
ARM_USART_FLOW_CONTROL_NONE,
baudrate);
if (result == ARM_DRIVER_OK) {
UartConfigured = 1U;
} else {
UartConfigured = 0U;
switch (result) {
case ARM_USART_ERROR_BAUDRATE:
status = 0U;
baudrate = 0U;
break;
case ARM_USART_ERROR_DATA_BITS:
status = DAP_UART_CFG_ERROR_DATA_BITS;
break;
case ARM_USART_ERROR_PARITY:
status = DAP_UART_CFG_ERROR_PARITY;
break;
case ARM_USART_ERROR_STOP_BITS:
status = DAP_UART_CFG_ERROR_STOP_BITS;
break;
default:
status = DAP_UART_CFG_ERROR_DATA_BITS |
DAP_UART_CFG_ERROR_PARITY |
DAP_UART_CFG_ERROR_STOP_BITS;
baudrate = 0U;
break;
}
}
}
*response++ = status;
*response++ = (uint8_t)(baudrate >> 0);
*response++ = (uint8_t)(baudrate >> 8);
*response++ = (uint8_t)(baudrate >> 16);
*response = (uint8_t)(baudrate >> 24);
return ((5U << 16) | 5U);
}
// Process UART Control command and prepare response
// request: pointer to request data
// response: pointer to response data
// return: number of bytes in response (lower 16 bits)
// number of bytes in request (upper 16 bits)
uint32_t UART_Control (const uint8_t *request, uint8_t *response) {
uint8_t control;
uint8_t result;
uint8_t ret = DAP_OK;
if (UartTransport != DAP_UART_TRANSPORT_DAP_COMMAND) {
ret = DAP_ERROR;
} else {
control = *request;
if ((control & DAP_UART_CONTROL_RX_DISABLE) != 0U) {
// Receive disable
UART_Receive_Disable();
} else if ((control & DAP_UART_CONTROL_RX_ENABLE) != 0U) {
// Receive enable
if (UartConfigured != 0U) {
result = UART_Receive_Enable();
if (result != DAP_OK) {
ret = DAP_ERROR;
}
} else {
ret = DAP_ERROR;
}
}
if ((control & DAP_UART_CONTROL_RX_BUF_FLUSH) != 0U) {
UART_Receive_Flush();
}
if ((control & DAP_UART_CONTROL_TX_DISABLE) != 0U) {
// Transmit disable
UART_Transmit_Disable();
} else if ((control & DAP_UART_CONTROL_TX_ENABLE) != 0U) {
// Transmit enable
if (UartConfigured != 0U) {
result = UART_Transmit_Enable();
if (result != DAP_OK) {
ret = DAP_ERROR;
}
} else {
ret = DAP_ERROR;
}
}
if ((control & DAP_UART_CONTROL_TX_BUF_FLUSH) != 0U) {
UART_Transmit_Flush();
}
}
*response = ret;
return ((1U << 16) | 1U);
}
// Process UART Status command and prepare response
// response: pointer to response data
// return: number of bytes in response (lower 16 bits)
// number of bytes in request (upper 16 bits)
uint32_t UART_Status (uint8_t *response) {
uint32_t rx_cnt, tx_cnt;
uint32_t cnt;
uint8_t status;
if ((UartTransport != DAP_UART_TRANSPORT_DAP_COMMAND) ||
(UartConfigured == 0U)) {
rx_cnt = 0U;
tx_cnt = 0U;
status = 0U;
} else {
rx_cnt = UartRxIndexI - UartRxIndexO;
rx_cnt += pUSART->GetRxCount();
if (rx_cnt > (DAP_UART_RX_BUFFER_SIZE - (UART_RX_BLOCK_SIZE*2))) {
// Overflow
UartErrorRxDataLost = 1U;
rx_cnt = (DAP_UART_RX_BUFFER_SIZE - (UART_RX_BLOCK_SIZE*2));
UartRxIndexO = UartRxIndexI - rx_cnt;
}
tx_cnt = UartTxIndexI - UartTxIndexO;
cnt = pUSART->GetTxCount();
if (UartTransmitActive != 0U) {
tx_cnt -= cnt;
}
status = UART_Get_Status();
}
*response++ = status;
*response++ = (uint8_t)(rx_cnt >> 0);
*response++ = (uint8_t)(rx_cnt >> 8);
*response++ = (uint8_t)(rx_cnt >> 16);
*response++ = (uint8_t)(rx_cnt >> 24);
*response++ = (uint8_t)(tx_cnt >> 0);
*response++ = (uint8_t)(tx_cnt >> 8);
*response++ = (uint8_t)(tx_cnt >> 16);
*response = (uint8_t)(tx_cnt >> 24);
return ((0U << 16) | 9U);
}
// Process UART Transfer command and prepare response
// request: pointer to request data
// response: pointer to response data
// return: number of bytes in response (lower 16 bits)
// number of bytes in request (upper 16 bits)
uint32_t UART_Transfer (const uint8_t *request, uint8_t *response) {
uint32_t rx_cnt, tx_cnt;
uint32_t rx_num, tx_num;
uint8_t *rx_data;
const
uint8_t *tx_data;
uint32_t num;
uint32_t index;
uint8_t status;
if (UartTransport != DAP_UART_TRANSPORT_DAP_COMMAND) {
status = 0U;
rx_cnt = 0U;
tx_cnt = 0U;
} else {
// RX Data
rx_cnt = ((uint32_t)(*(request+0) << 0) |
(uint32_t)(*(request+1) << 8));
if (rx_cnt > (DAP_PACKET_SIZE - 6U)) {
rx_cnt = (DAP_PACKET_SIZE - 6U);
}
rx_num = UartRxIndexI - UartRxIndexO;
rx_num += pUSART->GetRxCount();
if (rx_num > (DAP_UART_RX_BUFFER_SIZE - (UART_RX_BLOCK_SIZE*2))) {
// Overflow
UartErrorRxDataLost = 1U;
rx_num = (DAP_UART_RX_BUFFER_SIZE - (UART_RX_BLOCK_SIZE*2));
UartRxIndexO = UartRxIndexI - rx_num;
}
if (rx_cnt > rx_num) {
rx_cnt = rx_num;
}
rx_data = (response+5);
index = UartRxIndexO & (DAP_UART_RX_BUFFER_SIZE - 1U);
if ((index + rx_cnt) <= DAP_UART_RX_BUFFER_SIZE) {
memcpy( rx_data, &UartRxBuf[index], rx_cnt);
} else {
num = DAP_UART_RX_BUFFER_SIZE - index;
memcpy( rx_data, &UartRxBuf[index], num);
memcpy(&rx_data[num], &UartRxBuf[0], rx_cnt - num);
}
UartRxIndexO += rx_cnt;
// TX Data
tx_cnt = ((uint32_t)(*(request+2) << 0) |
(uint32_t)(*(request+3) << 8));
tx_data = (request+4);
if (tx_cnt > (DAP_PACKET_SIZE - 5U)) {
tx_cnt = (DAP_PACKET_SIZE - 5U);
}
tx_num = UartTxIndexI - UartTxIndexO;
num = pUSART->GetTxCount();
if (UartTransmitActive != 0U) {
tx_num -= num;
}
if (tx_cnt > (DAP_UART_TX_BUFFER_SIZE - tx_num)) {
tx_cnt = (DAP_UART_TX_BUFFER_SIZE - tx_num);
}
index = UartTxIndexI & (DAP_UART_TX_BUFFER_SIZE - 1U);
if ((index + tx_cnt) <= DAP_UART_TX_BUFFER_SIZE) {
memcpy(&UartTxBuf[index], tx_data, tx_cnt);
} else {
num = DAP_UART_TX_BUFFER_SIZE - index;
memcpy(&UartTxBuf[index], tx_data, num);
memcpy(&UartTxBuf[0], &tx_data[num], tx_cnt - num);
}
UartTxIndexI += tx_cnt;
if (UartTransmitActive == 0U) {
UART_Transmit();
}
status = UART_Get_Status();
}
*response++ = status;
*response++ = (uint8_t)(tx_cnt >> 0);
*response++ = (uint8_t)(tx_cnt >> 8);
*response++ = (uint8_t)(rx_cnt >> 0);
*response = (uint8_t)(rx_cnt >> 8);
return (((4U + tx_cnt) << 16) | (5U + rx_cnt));
}
#endif /* DAP_UART */
core/DAP/debug_ca.h → core/SWD_host/debug_ca.h
View File
core/DAP/debug_cm.h → core/SWD_host/debug_cm.h
View File